主營小明看看永久:空氣呼吸器兩室一站進口超高壓壓縮機CFS-2防爆充氣箱集成式充氣站氦氣回收機全無油氮氣增壓機消防充填泵空氣呼吸器充氣泵呼吸空氣充氣泵氮氣增壓機高壓壓縮機高壓空氣壓縮機呼吸空氣填充泵中高壓壓縮機呼吸空氣壓縮機
小明看看永久資料
小明看看永久[

進口呼吸空氣充填泵

]資料
如果您對該小明看看永久感興趣的話,可以
小明看看永久名稱: 進口呼吸空氣充填泵
小明看看永久型號: PGB220E
小明看看永久展商: 英國普瑞格斯
簡單介紹
名稱:呼吸空氣壓縮機/進口呼吸空氣充填泵  型号:PGB220E  压力:225/330 MPa  尺寸:1070*510*650 L×W×H(mm)  重量:146 Kg  驱动方式:三相電機  压缩机级数:3  排气流量:220 L/min  转速:1350 rpm  功率:4 KW  润滑油含量:4 L

進口呼吸空氣充填泵的詳細介紹

進口呼吸空氣充填泵優點

Advantages

W型,33級單動作活塞式壓縮,*高排氣壓力爲330Bar。**活塞平衡,單件連杆設計。大排量,低轉速,風冷無基礎設計,多重V帶驅動,飛濺潤滑。裝備齊全,爲工業用戶之理想選擇。

" LSCOMP " LSCOMPRESSOR, LSPE200-TE-H MOD., reciprocating, stationary, in "W" frame arrangement, balanced, single-acting, THREE STAGE compressor for Air up to330 bar., Large capacity, slow running, air - cooled, WITH CYLINDERS LUBRICATION, stationary unit, fully equipped. Ideal for Industrial applications.

 

壓縮機爲整體撬裝式結構,此種結構來源于油田應用,經不斷改良而適合于呼吸空氣充填泵的要求。壓縮機采用風冷氣缸,高壓縮比,高效率。壓縮機經平衡設計,振動小,不需要特別的基礎,在某些場合,甚至可以在高密度橡膠襯墊上運行。

The compressor is a trunk piston style compressor. It is derived from a proven oil field compressor frame that has been modified for the demands of high-pressure compression. The frame is then equipped with air-cooled cylinders, permitting higher compression ratios and better efficiency. The compressor is balanced so that, in most cases, the compressor can be run on a high-density rubber pad, and does not require a special foundation.

 

機組配有多重保護功能,包含排氣溫度高停機,低油壓停機,末級排氣壓力高停機。

Critical shutdowns include a high discharge gas temperature switch,  low oil pressure switch,  and a high discharge gas pressure switch (final stage).

 

壓縮機每級出口配有風冷冷卻器(另有水冷冷卻器作爲選購件可供選擇),安全閥,氣水分離器,自動排汙閥。所有內部管路和連接均出廠前安裝完畢,方便現場安裝。

Additional equipment include an air cooled heat exchanger after each stage of compression (water cooled heat exchangers available as an option), pressure safety valves after each stage of compression, all internal skid piping, personnel guards over rotating components, a separator after each stage of compression, and an automatic  condensate drain system.

 

可靠的性能:由于采用了可靠的設計和耐腐蝕的過濾器和冷卻器, 適用于連續運行的場合

Dependable Performance: suited for continuous operation, due to their rugged design and corrosion resistant intermediate filter and cooler assemblies.

尖端的設計: 驅動部分的運動部件和連杆均經過**平衡, 因此機組的震動極小, 連杆的負荷平衡. 級間冷卻器, 翅片式後冷卻器, 翅片式氣缸,翅片式鋁制缸頭, 帶有風扇的飛輪,均保證極低的運行和排氣溫度.
State-of-the-Art Design: balanced moving parts in the drive gear and connecting rods allows for low vibration and balanced rod loads. Interstage coolers, finned after cooler, finned cylinders, finned aluminum heads, and fan-bladed flywheel produce cooler operating and discLSErge temperatures.

 

上等的材質: 鑄鐵的氣缸確保長壽命, 采用具有延展性鐵制材料制成的平衡曲軸,帶有大直徑平衡塊確保低軸承負荷,高強度並增加了機組壽命.鋁制缸頭提供超強的散熱.7075-T6鋁合金連杆提供高強度. 鋁制曲軸箱消除了不必要的重量.

Top Graded Materials: cast iron cylinders for long life; ductile iron counterbalanced cranksLSEft with large diameter throw for low bearing loads, high strength and increased life; aluminum cylinder heads for superior heat dissipation; 7075-T6 aluminum connecting rods for high strength; and aluminum crankcase for elimination unnecessary weight.

 

 

高質量部件:低摩擦軸承提供平滑的運行並降低功耗. 前後軸承提供**的曲軸對中,延長曲軸壽命. 全封閉風扇防護罩. 飛輪經過**平衡並帶有風扇葉片,提供極好的冷卻能力. 重載型曲軸驅動齒輪式油泵爲磨損區域提供充足的潤滑.不鏽鋼閥片耐磨損, 散熱性好. 閥座采用鍍鎳處理,耐腐蝕.

High Quality Components: anti-friction bearings for smooth operation with lower horsepower; front and rear bearings for precise cranksLSEft alignment and long sLSEft life; fully enclosed, all metal fan-blade guard; fly wheel precision-balanced and fan-bladed for excellent cooling capacity; heavy duty, sLSEft-driven, gear-type oil pump for generous lubrication to critical wear areas for longer pump life; stainless steel, disc-in-plate valves for long wear and excellent heat resistance and dissipation; valve housings nickel-plated for corrosion resistance.

 

 

 

 

機組供貨範圍 Scope of supply

 

風冷,單動作,三級壓縮三缸壓縮機主體。

Three-CYLINDER COMPRESSOR, air cooled, single effect, three-stage compression.

 

可拆卸式進氣消聲過濾器,10微米精度 

Intake removable filter, with silencer.

 

常規慣性飛輪,V帶驅動

Normal inertia flywheel, for V belts transmission.

 

V型皮帶及皮帶防護罩

V belt and belt enclosure

 

專用冷卻風扇

Cooling fan

 

飛濺潤滑系統

flash lubritation system

 

輕合金活塞

Light alloy pistons

 

鋁制汽缸頭,獨立閥座

Aluminium cylinder heads, with individual valve pockets.

 

全自動環形閥和活塞環,大流量,多動作,高效率

Automatic valves, big flow area, operating much below their nominal cLSracteristics.

 

風冷不鏽鋼中間冷卻器

AIR-COOLED stainless steel intercoolers between stages

 

風冷後冷卻器帶安全閥

AIR-COOLED stainless steel aftercooler, furnished with safety valve.

 

,三級水氣分離器

air/coolant separators after the second stage cooler and after cooler

3KW 380V/3/50, IP54電機

3KW, 380V/3/50 IP54 motor

 

鋼制機組標准型防護罩

Steel cabinet enclosure

 

防震腳墊

Vibration isolation

 

機組潤滑合成油

Lubrication oil

小明看看永久留言
標題
小明看看永久
聯系小明看看永久
內容
驗證碼
點擊換一張
注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!


普瑞格斯壓縮機(上海)有限公司小明看看永久      小明看看永久:021-57758888、021-57685119 小明看看永久:021-33881170
小明看看永久:上海市松江區闵申路666-4號 小明看看永久:201612 滬ICP備11012717號-2  
 

沪公网安备 31011702004381号